Two main reasons:\n\nIt may crack your beads\nIt lose the shiny reflection appearance\n\nRead on to find out more\nTesting sinking agarwood beads? \n\nEveryone loves sinking agarwood beads, the darker the better right? Who else does not? It is very tempted to submerge your bracelet or 108 mala agarwood beads underwater to test its "sinking" quality. However, are you aware that by doing so will damage your beads if not done correctly?\nWhat to test?\nLet's go back to the basics, what is the real reasons for buying these beads? Most people would collect them, some wear them to attract luck, others are for Feng Shui reasons.\nPeople usually exam agarwood beads by their scemt and apperarance Although to appreciate oud scent, it is better to heat oud chips or apply oud oil on your arms, wrists, behind ears or your clothes. Anyway, agarwood beads do contain some oud scent but it could only be as good as oud chips at room temperature.\nAppearance: the darker the heavier the better. If it is solid black, chances of counterfeit are high. However, let's quickly discuss how these beads are made\n\n\nBelow is the material, unfortunately, with agarwood beads you can't pick and choose and agarwood chips\n\nAn agarwood bead is generally in a sphere shape which was made from agarwood cube (or rectangular prism) like the one below\nYou can see, there are agarwood beads containing more resin than others. It is extremely difficult to only "cube" out the most resinous parts only \nSo back to the question: should you test your agarwood beads under water to find out if they are sinking quality?\nYes, you can but you need to know how to do it properly. Here are the steps (try it as your own risks)\n\nGet a soft cloth or towel ready\nGet a jug of water preferably tall glass\nPut your beads into the tall glass\nWatch if it sinks slowly or fast, keep it under 30 seconds, the shorter the better\nThey the mala or bracelet out of the jug and dry it immediately with your soft clothes, you will notice a beautiful smell from the agarwood beads, very noticeable. This works with wood chips too, smell better right after submerged under water\nLet's it dry but keep polishing these beads with your soft cloth gently, watch out for crack as water will expand the wood and eventually crack the beads\n\nSo why so much hassle? Is there another safer way to test?\nYes, unfortunately, it is not on your hand but the hunters, and again it comes down to trust. Testing the material, agarwood logs is safer than the beads\nIf the agarwood logs are sinking, chances are the beads would be sinking. It does not matter of the agarwood logs cracked, as it would be fixed during beads making process.\nWhat does it look like when agarwood beads submerged into water for so long?\n Please see below, this is an expensive experience, please do not try it at home. After 3 minutes of submerging,\n\nthe agarwood beads expanded unevenly causing cracks, the shiny reflection is lost,\nwood warping occurred, beads deformed\n\n\n\n\nThese beads are excellent in quality, at least half sinking, look at the weight without string: above 27 g which is very decent.\n \nSo how do we fix these cracking beads?\n We can't, it is what it is. It happened as the consequence of long submerging underwater. It cracked, so we decided so crack them open to show you what it looks like\n\nAre you curious to see what inside a half bead? Yes you are, we know it . We do you a big favour too, see below the enlargement of agarwood beads: can you see the resin and resin duct? Sure you can !\n\n\n \nWhat do you do in relation to those agarwood beads which lose the shiny reflection?\n \n\n\n\n \nThese beads will be cotton polished again with the beads making machine to restore the look. This practise is usual and known as polishing. It can be done with cotton cloth or sandapaper. \n \n\n \n\n \n\n\n\n\n\n Yeah, the reflection comes back, see the light ?\n\n \n\nSo in short, please do not try to submerge your agarwood beads underwater without proper preparation as it can seriously damage or ruin your beads.