0

Your Cart is Empty

*New* The Breathable Incense Pad - a new way of experience burning incense

Do you have any leftover unburnt pieces of incense, especially the high-end ones?



If you were like me, who loved burning stickless incense (and drinking tea), you would have many pieces of leftover, unburnt incense.

Many incense holders in many shapes and forms are designed to hold your incense sticks. Some holders are simple, and many look great, but they have one thing in common:

Unburnt incense sticks

 

It means your current incense holder is less than 100% efficient in burning incense. 


Here is what I mean


You use your current incense holder to hold burning incense. You will notice that when the incense burns almost completely, it will turn off. The reason is simple: the incense holder stops the incense “life” at the contact point. Every time you burn an incense, stick with your incense holder; naturally, you will have a piece of unburnt incense. This unburnt piece will be around 1cm approximately. If you burn one incense a day, then you will have 30 unburnt pieces in a month.

These unburnt incense sticks are too short of burning. But it would be too wasteful to throw them away. I am sure you have realised that these unburnt sticks could be expensive in the long run, especially if these sticks contain genuine agarwood.

 

What a dilemma! what should you do?


Here is the good news


Introduce the Breathable Incense Pad- experience a complete burn without waste

The Breathable Incense Pad is a specially-made pad that allows incense to burn horizontally.

When you place your burning incense on this pad, a couple of things happen.

This pad breathes life into your incense by allowing oxygen to come into contact with it. You see, when you lay your incense horizontally on the ground or other surfaces, your incense will turn off because there is not enough oxygen when the fire contact that surface. However, this pad is different. Take a closer look, and you will notice that your incense does not lay flat but “levitate” on it.

Oxygen can flow through the incense and the pad making incense burns happily :). The best part: your incense pad remains unharmed 

 

 

This design allows oxygen, the life force of the fire, to continue to burn without interruption. 

Your incense will burn happily on this pad

You can see the smoke of the backflow cone accumulating around the cone at the bottom. It could only happen if there was enough space so the smoke could pass through the hole of the incense cone.

In addition to the ultimate burning experience, this pad also adds an extra layer of protection to your furniture. Take a look at the damage below

If you use this Breathable Incense Pad to burn your incense, your table will remain intact.

Burning downflow incense is a great experience. Sometimes, some people think they could place the cone incense directly on the table. Unfortunately, the high temperature from the burning cone will damage your bench or table permanently.

By burning your cone incense on this pad in a windless area, your incense pad will absorb most of the heat of the cone keeping your furniture safe. Please note, keep your incense away from the wind as it could knock your incense off the pad.

 

Dimension 20.5 cm x 3cm

P/S Want to see what this magical pad can do with your remaining unburnt incense?

Check out the "firework" style of burning multiple unburn sticks. 

 

Please note if your incense is scented with fragrance oil or synthetic oil, you will find it overwhelming. 

The solution is simple: you can burn the unburnt one at a time.